5-5. FRAME AND BRACKET MAINTENANCE
This task covers:
INITIAL SETUP :
General Mechanic Tool Kit (Appendix B, Section lil, Item 4)
Shop Equipment, Welding (Appendix B, section lil, Item 6)
Lockwashers (4) (Appendix F)
EMD Pump Assembly Removed (Paragraph 4-13)
Junction Box Removed (Paragraph 4-12)
Pump/Motor Removed (Paragraph 5-4)
General Safetv Instructions
Welding operations produce heat, highly toxic fumes, injurious
radiation, metal slag and airborne particles. Protective
Discard mandatory replacement parts.
Remove nuts (1), lockwashers (2), flat washers (3) and screws (4).
Separate brackets (5) from frame (6)
Inspect for cracks, dents, corrosion or other damage.
Make certain the frame (6) and bracket (5) are free of
dirt, grease, oil, grease or other foreign matter and bare metal
is exposed for welding. Refer to TM 43-0139 for cleaning.