Table 4-2. Organizational Troubleshooting (Cont)
TEST OR INSPECTION
10. PUMP FAILS TO PUMP PRODUCT.
Step1. Check for low engine speed,
Adjust carburetor (para. 4-4 i ).
Step 2. Check for kinked Or defective discharge hose.
a. Remove kinks from hose.
b. Replace damaged or defective hose (para. 4-20).
Step 3. Check for clogged fiIter/separator.
Inspect and clean filter/separator
11. PUMP NOISY.
Check for pump vibrating on base.
and associated parts.
Assure pump is properly secured with tiedowns.
12. HOSE REEL DOES NOT TURN EASILY.
Step 1. Check for improper lubrication.
Lubricate fittings in accordance with the figure 3-1.
Step 2. Check for misaligned hose reel.
Realign hose reel as necessary.