Repair the engine by replacing the following components:
Allow the engine to cool for approximately 30 minutes before removing
starter. The engine is hot and presents a burn hazard. Coming in contact with
hot engine parts may cause burns.
a. Disconnect battery cable at negative terminal post.
b. Tag and disconnect starter wiring (figure 15, item 1).
Loosen and remove starter mounting bolts (figure 15, item 2).
d. Remove starter (figure 15, item 3).
e. Install new starter.
Fasten new starter in place with mounting bolts (figure 15, item 2). Torque from 8.7 to 10.5 kg-m
g. Connect starter wiring (figure 15, item 1) and remove tags.
h. Reconnect battery cable at negative terminal post.
Figure 15. Starter Replacement