1. To replace hoses (figure 2, item 1), disconnect the appropriate hose from the elbow fitting at the
bottom of the piston valve (figure 2, item 2) (on the intake, or drain valve) first. Then disconnect the
hose from the adapter (figure 2, item 3). Remove cable ties as necessary. Reconnect new hose as
appropriate. Install cable ties as necessary.
Figure 2. Replacing Hydraulic Hoses
Fusible Frangible Link
2. To replace the fusible frangible link (figure 3, item 1) disconnect the link from the T fitting (figure 3,
item 2). Apply pipe sealant onto the threads of a new link and install onto the T fitting.
Manifold Assembly and its Components
3. To replace the hose nipples (figure 3, item 3), T fittings (figure 3, item 4), control knobs (figure 3,
item 5), or manifold (figure 3, item 6), disassemble the components in the sequence listed.
Reassemble new components in reverse sequence, applying pipe sealant onto the threads of
components being assembled.