TM 10-4630-206-12&P
0005 00
PREPARE SEP FOR MOVEMENT
CAUTION
Do not attempt to move or reposition the SEP until it has been
prepared by the following procedure. The SEP can otherwise be
easily damaged, specifically at the QDC fittings and drain valve.
NOTE
The SEP must be packed in the same manner as for administrative
storage.
Moving the SEP
(9-1-0150-1 and 9-1-0150-2)
Before moving the SEP, check the condition of the wooden pallet. If it has deteriorated to a point where it
may not support the SEP during movement, place the SEP onto a new pallet.
(9-1-0527)
Ensure the forks on the forklift are set properly. The integral pallet of the Waste Water Evacuation SEP
does not have the wide slots available with wooden pallets
SEP (9-1-0150-1 and 9-1-0150-2)
Prepared for Storage or Movement
0005 00-8