TM 10-4320-344-24P-3
Recoverability
Application/Explanation
Codes
F
-Reparable item. When uneconomically reparable,
condemn and dispose of the item at the direct
support or aviation intermediate level.
H
-Reparable item. When uneconomically reparable,
condemn and dispose of the item at the general
support level.
D
-Reparable item. When beyond lower level repair
capability, return to depot. Condemnation and
disposal of item not authorized below depot level.
L
-Reparable item. Condemnation and disposal not
authorized below specialized repair activity (SRA).
A
-Item requires special handling or condemnation
procedures because of specific reasons (e.g.,
precious metal content, high dollar value, critical
material, or hazardous material). Refer to
appropriate manuals/directives for specific
instructions.
3.2.3.
FSCM (Column (3)). The Federal Supply Code for Manufacturer (FSCM) is a 5 digit numeric code which is used
to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
3.2.4.
PART NUMBER (Column (4)). Indicates the primary number used by the manufacturer (individual, company,
firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its
engineering drawings, specifications standards, and inspection requirements to identify an item or range of items.
NOTE
When you use a NSN to requisition an item, the item you receive may have a different part number from the part
ordered.
3.2.5. DESCRIPTION AND USABLE ON CODE (UOC) (Column (5)). This column includes the following information:
a.
The Federal item name and, when required, a minimum description to identify the item.
b.
The physical security classification of the item is indicated by the parenthetical entry (insert applicable physical
security classification abbreviation, e.g., Phy Sec C1 (C) -Confidential, Phy Sec C1 (S) -Secret, Phy Sec C1 (T)
Top Secret).
c.
Items that are included in kits and sets are listed below the name of the kit or set.
d.
Spare/repair parts that make up an assembled item are listed immediately following the assembled item line entry.
e.
Part numbers for bulk materials are referenced in this column In the line item entry for the item to be
manufactured/fabricated.
f.
When the item is not used with all serial numbers of the same model, the effective serial numbers are shown on
the last line(s) of the description (before UOC).
5