Spur gear should not be removed from flywheel unless spur gear is damaged or
needs to be replaced.
e .
Remove flywheel (2) from crankshaft (3).
Figure 4-14.
Flywheel Removal, Model 609-A.
4.4.9.2 Repair.
Do not use cleaning solvent without proper ventilation and clothing.
Do not
smoke or use near open flame or excessive heat.
Dry cleaning solvent is
potentially dangerous to personnel and property.
Clean parts in a well-
ventilated area.
Avoid inhalation of solvent fumes.
Wear goggles and rubber
gloves to protect eyes and skin.
Wash exposed skin thoroughly.
Failure to
obey this warning may result in personal injury or death.
a.
Clean all components with cleaning solvent and thoroughly dry all components.
b .
Inspect flywheel (2) for cracks, distortions,
damage.
discoloration, wear, or other
c .
Inspect spur gear (4) for broken or cracked teeth, chips, or other damage. If
s p u r g e ar- ( 4)-
(1) Remove spur
is damaged, replace as follows:
Note chamfer, if present, on spur gear.
gear (4) from flywheel (3) and discard.
4-31
TM 10-4320-344-24
