TM 10-4320-344-24
2.16.8.3 Installation.
Wrap antiseize tape in direction of threads on all pipe threads prior to
assembly.
a.
Install gauge cover (17), three flat washers (16), spacer ring (15), three
flat washers (14),
and spacers (13) on control panel (12).
b .
Install pump discharge gauge assembly (9) and secure with three flat washers
(11) and screws (10).
c .
Install pipe tee (3) on pump discharge connection (8).
d.
Install new fluid pressure dampener (7) on pipe tee (3).
e .
Install female to female coupling (6) on fluid pressure dampener (7).
f .
Install hose assembly (5) on fluid pressure dampener (7) and secure with hose
clamp (4).
g .
Install pressure sensor (2) on pipe tee (3) and connect electrical connector
( 1 ) .
2-159
