2.7 PREPARATION FOR MOVEMENT.
Before the pumping assembly can be moved, the hoseline(s) or pipeline(s) must be
emptied and disconnected. Hoseline preparation and disconnection instructions for
the TWDS are contained in applicable TWDS technical manual.
2.7.1 Draining and Preparation of Puming Assemblies.
Refer to Figure 2-35 and drain
pumping assembly for movement as follows:
Remove drain plug (2).
Drain pump (1).
Install drain plug (2).
Figure 2-35. Pumping Assemblies Drain Plug Locations.
c. Install pipe caps on pump suction and discharge ports (3).