d. Using a puller, remove flywheel
Be careful not to damage the taper part of the crankshaft.
e. Remove flywheel key (7) from crankshaft (6)
a. Install flywheel key (7) onto crankshaft (6).
b. Install flywheel (5) onto crankshaft (6)
c. Install flywheel end nut (3) and washer (4).
d. Tighten flywheel end nut (3) by bracing the flywheel by inserting a pry bar through a hole in the flywheel into the
depression in the crankcase Torque flywheel end nut to 73-80 ft-lb (1000-1100 cm-kg)