TM 10-4320-315-24
3-6. MAINTENANCE OF NOISE ENCLOSURE - (Cont)
(2)
Install blind rivets as follows:
(a)
Select proper diameter and length of blind rivet (6).
(b)
Select appropriate nose piece (7) for hand blind riveter (8) and install nose piece.
(c)
Wet rivet (6) with sealant.
(d)
Holding hand blind riveter (8) at right angle to work, install riveter (8) on blind rivet stem (9).
(e)
Push against work with just enough force to firmly seat rivet (6) and prevent part separation.
(f)
Actuate riveter (8) and pull rivet (6) until stem (9) breaks.
3-8