TM 10-4320-310-14
6-4.
REPAIR/REPLACE TIMING COVER AND CAMSHAFT (Continued)
REMOVAL:
Lift both cam followers from camshaft when removing timing cover to prevent
bending by cam points.
1
Remove four hexagon head screws (1), two hexagon socket head screws (2), and four joints (3) and remove timing
cover (4) with assembled bushing (5), oil seal (6), intermediate ring (7) and ball bearing (8). Remove camshaft (9)
with assembled hexagon nut (10), wave washer (11), circlip (12), flanged wheel (13), roller bearing (14), and
spacer (15). Remove and discard gasket (16).
NOTE
Insertion of hexagon socket head cap screws in timing cover holes may aid in
removing of timing cover.
2
Matchmark two teeth of camshaft gear and one tooth of crankshaft gear to make sure of proper alignment of
gearing when reinstalling timing cover.
6-11