TM 10-4320-310-14
5-5. REPLACE ENGINE ASSEMBLY (Continued)
4
Lift engine assembly (5) and lower onto blocks on a stable, level work platform.
INSTALLATION:
.
Death or serious injury could occur if unauthorized or unnecessary personnel
are in the hoisting area. Permit only personnel actually engaged in the
hoisting operation to be near the unit and hoisting equipment. All instructions
for the hoisting operations must come from one authorized person.
Injury or damage to unit could occur from improper hoisting. Hoist the load
slowly to avoid tearing out lifting strap, slipping slings, or load shift. Do not
jerk the load or swing it from side to side-to-side when hoisting. This places
additional stress on hoisting components which can cause failure and loss of
load. Be sure hoisting equipment is on solid footing and is suitable for the
size of the load. Watch boom angle and overhead clearance when hoisting.
1
Attach lifting equipment. Lift and carefully lower engine assembly (5). Align mounting holes on engine and engine
brackets.
2
Install four hexagon screws (2) and four new lock washers (3) on each engine bracket (4). Tighten securely.
5-7