Item
No.
26
27
TM 10-4320-309-14
TM 4320-14/1
Table 2-1. Preventive Maintenance Checks and Services - Continued
Interval
After
After
ITEM TO BE INSPECTED
PROCEDURES
Seal
Visually inspect pump casing for leaks.
ENGINE
Oil Level
With engine level, remove oil dipstick (1), wipe with lint-
free cloth (Appendix E, Section II, Item 11)
Insert dipstick all the way into engine, then withdraw. En-
gine oil should coat dipstick to top mark.
NOTE
Do not overfill engine with lube oil.
If oil is below top mark, add oil to dipstick connection (2),
to bring oil up to top mark; check oil level again. Repeat
the previous two steps until oil coats the dipstick to the top
mark.
Check that the dipstick is tightly closed.
Not Fully Mission
Capable if:
Class III leakage of
water/fuel. Notify Unit
Maintenance.
Oil level is low.
2-19