TM 10-4320-309-14
TM 4320-14/1
b.
Install flywheel (5) onto crankshaft (6).
c.
Install flywheel end nut (3) and washer (4).
d.
Tighten flywheel end nut (3) by using flywheel tightening handle to prevent flywheel from turning. Use
torque wrench to tighten flywheel end nut to 73-80 ft-lb (1000-1100 cm-kg).
e.
Remove flywheel tightening handle.
f.
Install starter pulley (1) using three starter pulley bolts (2).
5-43
Figure 5-45. Tightening the Flywheel