TM 10-4320-309-14
TM 4320-14/1
b.
Shake dry and rinse thoroughly again in clean fuel.
c.
Continue until all dirt has been removed from the strainer.
d.
Dry thoroughly to remove fuel.
e.
If strainer cannot be completely cleaned, then it should be replaced.
INSPECTION:
a.
Check for splitting or cracking of O-ring (4).
b.
Check gasket (3) for damage.
c.
Examine strainer for damaged mesh, hardened deposits, or other damage.
INSTALLATION:
a.
Grease O-ring (4) and insert into groove on end of lube oil strainer(l).
b.
Insert lube oil strainer (1) into hole in crankcase cover.
c.
Install lube oil strainer gasket (3) after coating with oil and position with cover (2) so that holes lineup
with holes on crankcase cover.
d.
Secure cover with two hex head bolts (5). Tighten securely.
4-46