TM 10-4320-309-14
TM 4320-14/1
4-14. REPLACE/INSPECT/REPAIR PUMP CASING
This task covers:
a) Removal
c) Repair
b) Inspection
d) Installation
INITIAL SETUP
Tools
Equipment
Condition
Tool Kit, General Mechanics (Item 2,
Para
Appendix B, Section III)
3-16
Outlet air sound enclosure assembly
Shop Equipment Automotive Maintenance
removed.
and Repair: Field Maintenance,
Common No. 2 (Item 4, Appendix B,
3-17
Check valve assembly and suction
Section III)
discharge pipes removed.
Hook Pick (Item 16, Appendix B,
4-11
Volute assembly removed.
Section III)
Hex Key Drive (Item 11, Appendix B,
4-12
Impeller, shaft seal, shaft adapter
Section III)
removed.
4-13
Wear plate removed.
Materials/Parts
4-19
Recoil starter assembly removed.
Cloth, Lint-free (Item 11, Appendix E
Section II)
REMOVAL:
a.
Completely drain the pump by removing pipe cap (1), pipe nipple (2), and bushing adapter (3).
b.
Remove pipe plug (8) and bushing adapter (9).
c.
Remove four self-sealing screws (6).
d.
Separate pump casing (4) from engine.
INSPECTION:
a.
Wipe surface areas with dean, dry cloth.
When using compressed air, always use chip guards and wear eye
protection.
b.
Inspect all surfaces and edges for cracks.
c.
Blow out suspicious looting and difficult to reach areas with compressed air to remove deposits and
reveal flaws.
d.
Inspect threaded inserts for damaged threads.
4-25