TM 10-4320-307-24
2-27
BATTERIES, BATTERY BOX, AND BATTERY CABLE ASSEMBLY SERVICE/TEST/REPAIR/REPLACE
(CONT).
6.
Maintain proper battery electrolyte level as follows:
a.
Remove battery filler caps (13).
NOTE
Use only distilled water or a good grade drinking
water (excluding mineral water).
b.
Check electrolyte level. If low, add distilled water
up to split rings (14).
c.
Install battery filler caps (13).
7.
Install battery box cover (2) and secure with battery
box clips (1).
TESTING:
1.
Open battery box clips (1).
2.
Remove battery box cover (2).
Serious injury could occur from the careless
handling of storage batteries or battery
electrolyte (acid). If acid is splashed on
skin, wash the affected area immediately
with plenty of clean water. If acid is
splashed in the eyes, wash immediately with
plenty of water and get medical attention.
3.
Check specific gravity of batteries (3).
4.
Remove battery cables (4) and perform continuity
check.
2-83