TM 10-4320-307-24
2-26
PIPING AND VENT ASSEMBLY REPLACE (CONT).
3.
Remove piping assembly, cyclone separator (12) as
follows:
a.
Loosen two 1/2-inch pipe unions (13).
b.
Remove four bolts (14), nuts (15), and gasket (16)
from 1/2-inch flange (17).
c.
Remove piping assembly (12) from pump (7).
4.
Remove piping assembly cyclone separator (18) as
follows:
a.
Loosen two 1/2-inch pipe unions (19).
b.
Remove four bolts (20), nuts (21), and gasket (22)
from 1/2-inch flange (23).
c.
Remove piping assembly (18) from pump (7).
2-74