STORAGE BOX AND COVER REPAIR/REPLACE (CONT).
Dry cleaning solvent is potentially dangerous. Avoid repeated and prolonged breathing
of vapors and skin contact with the liquid. Do not use near open flame, arcing
equipment, or other ignition source. Always wear eye protection and protective clothing.
Death or serious injury could occur if compressed air is directed against the skin. Do not
use compressed air for cleaning or drying unless the pressure is/has been reduced to 30
psi (2.11 kgcm2) or less. When working with compressed air always use chip guards, eye
protection, and other personal protective equipment.
Remove all oily dirt, grease, and diesel fuel oil from
storage box (1) and components with dry cleaning
Dry all parts with compressed air.
Inspect storage box latches (2) and cover (3) for proper
Inspect the surfaces of the storage box (1), cover (3),
and handle (4). Remove minor corroded, dented, or
chipped areas using abrasive cloth. Clean and refinish
surfaces. If welding is required, notify direct support