ENGINE ENCLOSURE REPAIR/REPLACE (CONT).
Install side panel assembly (8) as follows:
Position side panel (8) in place.
From inside engine enclosure (4), rotate handles
and secure side panel (8) in place.
Repeat steps a and b for opposite side.
Install door assembly (9) as follows:
Lift door assembly (9) and position on hinges.
Position hold opening device (10) in place.
Install eight self tapping screws (11) that secure
hold opening device (10) to engine enclosure
(4) and door assembly (9).
Push handle assembly (12) down and secure
door in place.
Repeat steps a through c for remaining doors.