ENGINE ENCLOSURE REPAIR/REPLACE (CONT).
15. Remove enclosure (3) from skid assembly (28) as follows:
Install four lifting eyes to the corners of engine enclosure.
Secure sling to four eyebolts (3). Secure hoist to sling above the center of the enclosure.
Remove 12 screws and washers (29) and nuts (30) securing enclosure (3) to skid (28).
The enclosure with doors weighs 1258 lbs (570 kg). Use a suitable lifting device to
prevent injury to personnel.
Carefully lift enclosure (3) from skid (28) making sure it does not catch on or damage engine or pump
Place removed enclosure on blocks, leveled to prevent distortion of the frame.
16. Remove end panels (31) as follows:
Remove five bolts, washers (32), and clamps (33) securing end panels.(31) to enclosure.
Swing end panels open and lift end panels from enclosure hinges.