TM 10-4320-307-24
2-22
TANK ASSEMBLY REPAIR/REPLACE (CONT).
1.
Loosen cap (1) on fuel tank (2).
2.
Remove drain plug (3).
3.
Drain fuel into a suitable container. Tank capacity is 110 gallons.
4.
Install drain plug (3).
5.
Tighten cap (1).
6.
Remove four screws (4), washers (5), nuts (6) securing fuel tank (2) to skid assembly (7).
7.
Position a suitable lifting device over the fuel tank assembly (2).
8.
Attach slings to lifting eyes (8) and put tension on slings. Make sure assembly is properly supported.
9.
Lift and remove tank assembly (2) from skid assembly (7).
10. Lower onto blocks on a stable, level work platform.
2-51