TM 10-4320-307-24
4-9
FUEL PUMP ASSEMBLY REPAIR/CALIBRATE (CONT).
3.
Install governor spring pack (68) as follows:
CAUTION
Parts must be submerged in diesel fuel and hands wet with diesel fuel before
assembling governor spring pack to prevent damage to close tolerance parts.
a.
Install idle spring plunger (69), spring (70), washer (71), spring guide (72),spring (73), screw (74), governor
spring (75), shim (76), and retainer (77).
b.
Install snap ring (78) on barrel (79).
c.
Position spring pack cover (80) and gasket (81) on fuel pump housing (1) and secure using capscrews (82)
and washers (83).
4-67