FUEL PUMP ASSEMBLY REPAIR/CALIBRATE (CONT).
Install bypass valve shim (54) and torque spring (55) on governor plunger (56).
Install governor spacer (57), washer (58), and governor plunger driver (59) on governor plunger (56).
Install spring pack housing (60) and governor barrel (61) into pump housing (1).
Parts must be submerged in diesel fuel and hands wet with diesel fuel before step t is performed to prevent
damage to close tolerance parts.
Install governor plunger assembly (62) into pump housing (1).
Install main shaft cover and governor (26) and gasket (63) onto pump housing (1).
Install socket head screw (64) and washer (65).
Install six capscrews (66) and washers (67).