TM 10-4320-307-24
4-8
TURBOCHARGER (T18-A) REPAIR (CONT).
2.
Before disassembly of turbocharger, match mark compressor housing (1), turbine housing (2), and center housing (3)
to help in alignment during assembly.
3.
Remove V-band locknut (4) to loosen V-band clamp (5).
4.
Remove V-band clamp (5) and discard locknut (4).
5.
Remove compressor housing (1) from backplate (6).
6.
Remove eight bolts (7), four lockplates (8), and four clamps (9) that secure turbine housing (2) to center housing (3)
and discard lockplates (8).
7.
Separate turbine housing (2) from center housing (3) and lift center housing assembly out of turbine housing.
8.
Place turbine end of shaft in a vise equipped with copper jaws and tighten vise firmly but do not overtighten.
9.
Using a T-handle wrench, remove locknut (10) that secures compressor impeller (11) to wheel and shaft assembly
(12).
4-45