TM 10-4320-307-24
3-30
ACCESSORY DRIVE ASSEMBLY REPAIR/REPLACE (CONT ).
ASSEMBLY:
1.
If bushing (1) was removed, press a new bushing into
housing (2).
2.
Apply a coat of lubricating oil to inside of bushing (1).
3.
Insert shaft (3) through bushing (1) and through
housing (2).
4.
Install thrust bearing (4) to shaft (3). Lubricate thrust
bearing with grease.
5.
Align keyway in gear (5) with key (6) in shaft and
press gear onto shaft.
6.
Install thrust bearing (7) and washer (8) on shaft (3).
Lubricate thrust bearing with grease.
7.
Press coupling (9) onto shaft (3).
8.
Install capscrew (10) with washer (11) into end of
shaft (3).
3-100