TM 10-4320-307-24
3-16
CABINET ENCLOSURE REPAIR/REPLACE.
This task covers:
a. Removal
b. Cleaning/lnspection/Repair c. Installation
INITIAL SETUP
Tools
Personnel Required
Tool kit, general mechanic's (Item 1, Appendix B)
Two
Grinder
Manual References
Materials/Parts
TM 9-237
Dry cleaning solvent (Item 30, Appendix C)
Equipment
Emery cloth (Item 2, Appendix C)
Condition
Paint (Item 23, Appendix C)
Reference
Condition Description
Wire brush
Eye protection
Paragraph
Wiring, gages, switches,
Respiratory protection
2-28
and indicators removed
General Safety Instructions
Well ventilated area required for cleaning. welding,
and painting procedures.
REMOVAL:
1.
Remove four capscrews (1), nuts (2). and washers
(3).
2.
Remove nut (4), lockwashers (5), and washers (6)
securing grounding cable (7) to cabinet enclosure (8).
3.
Remove cabinet enclosure (8) from skid (9).
3-39