TM 10-4320-307-24
2-32
JUNCTION BOX REPAIR/REPLACE.
NOTE
Four screws (12) are captive.
5.
Loosen four screws (12) and washers (13) securing junction box JB2 cover (14) to junction box (15).
6.
Tag and remove wires from connectors X6 (16), X28 (17), X25 (18), X26 (19), and X27 (20).
7.
Remove locknuts (21) from connectors (16 thru 20) and remove connectors.
8.
Remove four screws (22), washers (23), nuts (24), and wire (25) securing junction box (15) to mounting (26).
REPAIR:
1.
Remove minor dents, rust, or corrosion on junction box and junction box cover. If severely damaged, dented, rusted,
or corroded, replace.
2.
Replace identification plates as necessary.
2-117