To prevent rolling or sliding, do not work on equipment that is not
Ensure both wheels of equipment are secure.
DO not touch exhaust system after equipment operation.
become very hot and can cause serious burns.
Failure to obey these warnings may result in serious personal injury.
Remove three nuts (figure 4-3, 1), lockwashers (2), bolts (3), and one
spacer (4) .
Slide heat shield (5) off muffler and exhaust pipe.
Inspect heat shield (5) for excessive burning or damage.
Replace any damaged or missing parts.
Position heat shield (5) over muffler and exhaust pipe such that cutout in
heat shield is over exhaust pipe.
Install one spacer (4), three bolts (3), lockwashers (2), and nuts (1).
Tighten nuts (1).