TM 10-4320-226-14
5.5.4.1 Removal.
a.
b.
c.
d.
e.
To prevent rolling or sliding, do not work on equipment that is not
securely stabilized.
Ensure both wheels are secure.
Failure to obey
these warnings may result in serious personal injury.
Loosen screw (figure 5-4, 1) of clamp (2) on airduct hose (3).
Slide clamp (2) over airduct hose (3).
Remove six nuts (4) and washers (5).
Pull intake manifold (6) away from studs (7) and withdraw intake manifold (6)
from airduct hose (3).
Remove gaskets (8) and discard.
5.5.4.2 Installation.
a.
Install gaskets (8) on studs (7).
b.
Insert intake manifold (6) in airduct hose(3).
c.
Position intake manifold (6) on studs (7) and install washers (5).
d.
Install nuts (4) on studs (7).
e.
Slide clamp (2) until positioned over airduct hose (3) and intake
manifold (6), then tighten screw (1).
5-15