4.16.4 Tow Bar Maintenance.
This task covers:
General Mechanics Tool Kit
Section III, Item 1)
To prevent rolling or sliding or
sliding, do not work on equipment
that is not securely stabilized.
Do not work on equipment without
Equipment shut down, refer to
following standard shop safety
paragraph 126.96.36.199 or 188.8.131.52.
Tow Bar Maintenance.
To prevent rolling or sliding, do not work on equipment that is not
Ensure both wheels are secure.
Failure to obey this
warning may result in serious personal injury.
Remove retaining pin (figure 4-60, 1).
Remove anchor pin (2).
Remove tow bar (3).
Install tow bar (3) and align anchor pin holes.
Install anchor pin (2) and retaining pin (1).