TM 10-4320-226-14
4.14.5.1 Removal.
a.
b.
c.
d.
e.
To prevent rolling or
securely stabilized.
warning may result in
Loosen clamp (figure
sliding, do not work on equipment that is not
Ensure both wheels are secure.
Failure to obey this
serious personal injury.
1-55, 1) and disconnect hose (2).
Remove elbow (3) and vent valve (4).
Disconnect discharge pressure hose(s) (5).
Support discharge connection (6) and disconnect it from pump and control panel
brackets by removing remaining five nuts (7), lockwashers (8), and washers (9)
from studs (10) on centrifugal pump.
Remove and discard gasket (11).
4.14.5.2 Installation.
a.
b.
c.
d.
e.
f.
g.
Install gasket (11) on studs (10) of centrifugal pump.
Install discharge connection (6) on studs (10) of centrifugal pump.
Install five washers (9) and lockwashers (8).
Thread five nuts (7).
Connect discharge pressure gauge hose(s) (5).
Install elbow (3) and vent valve (4).
Connect hose (2) and tighten clamp (1).
4-104