TM 10-4320-226-14
4.14.4.1 Removal.
To prevent rolling or sliding, do not work on equipment that is not
securely stabilized.
Ensure both wheels are secure.
Failure to obey this
warning may result in serious personal injury.
a.
Remove eight nuts (figure 4-54, 1), lockwashers (2) bolts (3) and one
bracket (4).
b.
Remove discharge manifold (5) from discharge connection (6).
c.
Remove and discard gasket (7).
4.14.4.2 Installation.
a.
Install new gasket (7).
b.
Position discharge manifold (5) against discharge connection (6) and align
mounting holes.
c.
Install bracket (4), eight bolts (3), new lockwashers (2) and nuts (1).
4-102