TM 10-4320-226-14
f.
Position fuel lever(8) with half-moon notch pointing up and aligned with stop pin on injection pump and install bolt(2
and lockwasher(3).
N O T E
The fuel lever has a half-moon shaped notch cut into it which is an indicator and when
properly installed the notch points up.
Ensure the solenoid plunger is fully
retracted(pushed all way in) into solenoid when installing.
g. Tighten two bolts(4) to secure assembled solenoid(l) to injection pump.
h. Connect wires and remove tags.
Figure 4-19. Shutdown Solenoid Maintenance (Model 350 PAWN).
4-40.2 Change 2