TM 10-4320-226-14
4.10.8.1 Removal.
To prevent rolling or sliding, do not work on equipment that is
not securely stabilized.
Ensure both wheels are secure.
Failure to obey this warning may result in serious personal
injury.
a.
Apply pressure to idler
b.
Remove V-belt (2) while
c.
Slowly release pressure
pulley (figure 4-12, 1) and push upward.
holding idler pulley (1).
from idler pulley (1).
4.10.8.2 Installation.
a.
Install cooling fan V-belt (2) on inner groove of crankshaft pulley (3) and
cooling fan pulley (4), then apply pressure to idler pulley (1) and push
upward.
b.
While holding idler pulley (1), install cooling fan V-belt (2) on idler
pulley (1).
c.
Release idler pulley (1).
Ensure cooling fan V-belt is on cooling fan
pulley (4), idler pulley (1), and inner groove crankshaft pulley (3).
4-30